The company has very rich practical experience in the manufacturing field of d14 anchor nut, anchor nut with plate, formwork panel accessories, and aims at the market and tracks the world’s advanced technology level, relying on a sound management system and after-sales service, and with an honest, trustworthy, stable attitude and reliable Quality, reasonable price, and strive to provide customers with satisfactory products. Our company serves the world, specializing in providing excellent quality formwork hardware to customers around the world. We are a service provider integrating R&D, design, manufacturing, sales, and professional after-sales service. We integrate innovative ideas and professional technology to tailor cost-effective solutions for customers, helping customers create higher corporate benefits and achieve higher value enhancement. We offer a one-stop solution for all your export needs. We insist on improving the quality management system and taking the system construction as the guarantee of quality management. We will strengthen the productivity of our products and continuously improve the performance of our products. We hope that through our intentions and changes, we will continue to meet the individual needs of customers. We offer customized solutions to fit the unique needs of our customers. Our company always adheres to the business philosophy of 'close service, more suitable products, help customers, achieve employees, and common development', constantly develop better technology. Our company is committed to reducing our environmental impact, promoting sustainable practices and initiatives.
-
![D15 Twin Jaw Wall Fastener]()
D15 Twin Jaw Wall FastenerD15 Twin Jaw Wall Fastener is a forged clamp for D15 trapezoidal water stop tie rod. Integrally hot-forged from 45# steel, it features a 70mm round bearing base and 115mm wide twin jaws.Unlike -
![Water Stopper For Shuttering And Tie Rod System]()
Water Stopper For Shuttering And Tie Rod SystemThe Water Stopper by Wellfit Scafform is a highly effective water barrier solution for reinforced concrete structures that require complete watertight protection. Engineered from durable cast steel, -
![90mm Casted Anchor Nut With Disc]()
90mm Casted Anchor Nut With DiscDW15/17 Disc Anchor Nut, also known as formwork wing nut, is a one-piece cast iron formwork tie rod accessory. It adopts round disc base and extended hex sleeve with trapezoidal thread. This formwork -
![Galvanized Water Barrier Nut For Concrete Formwork]()
Galvanized Water Barrier Nut For Concrete FormworkCast iron formwork water barrier nut, also called water stopper. It works with formwork tie rod to stop water seepage on concrete walls. Both galvanized finish and multiple sizes are available. -
![Formwork Tie Rod Hex Nut]()
Formwork Tie Rod Hex NutThis Formwork Tie Rod Hex Nut is integrally forged from 45# steel with electro-galvanized finish. Two standard sizes 30×50 and 30×100 are available (30 refers to width across flats). Custom stop pins -
![Two Claw Round Plate Wing Nut]()
Two Claw Round Plate Wing NutOur two-claw round plate nut is forged from solid 45# steel for D15 & D17 formwork tie rods. Integrated base eliminates extra washers; electro-galvanized for anti-rust use. Fast to install, in stock -
![Two Lug Disc Wing Nut]()
Two Lug Disc Wing NutThis hot-forged nut fits 15/17mm tie rods, large disc prevents formwork bulging with high load capacity.Made of Q235 steel, tougher than cast parts for repeated site reuse.Two-lug design allows hand -
![Casted Anchor Nut]()
Casted Anchor NutProducts Description Casted anchor nut is a kind of important formwork accessories in formwork system. Together with Tie Rods, they act as wall tie system, to fasten the formwork panels tightly -
![Rapid Wedge Clamp]()
Rapid Wedge ClampProducts Description Rapid Clamp / Wedge Clamp The Rapid Clamp, known as a Wedge Clamp,also called butterfly formwork clamp, formwork flat clamp, or rapid clamp. It is tightened by the wedge lock -
![Forged Combi Anchor Nut]()
Forged Combi Anchor NutProducts Description F orged formwork combi anchor nut This is a forged formwork combi anchor nut (also called Swivel Anchor Nut, Dome nut, wing nut pivot plate, Combi Nut with Plate).It is a swivel -
![Formwork Spring Clamp]()
Formwork Spring ClampProducts Description Formwork Spring Clamp ( Pressed Rapid Clamp ) The Formwork Spring Clamp is a type of formwork clamp used to tighten tie rod systems in concrete formwork. It is also called the -
![Rasto Type Corner Formwork Clamp]()
Rasto Type Corner Formwork ClampWellfit is a manufacturer of formwork clamps in China. You can find various types of formwork clamps here, such as Doka formwork clamps, Peri formwork clamps, forged or cast formwork clamps, etc. No
Stephanie Grimes
Even though this is our first time working together, you have impressed us with your sincerity
David Brown
It's a pleasure to work with such a great manufacturer.
Frances Maxwell
I highly recommend this product! Come and buy it, everyone. It's not only of great quality but also durable. My customers like it very much.
John Gentry
The product quality is very good, the price is very affordable, we are considering long-term cooperation with you!
Jennifer Gray
The company is constantly pursuing innovation, enhancing its independent development capabilities and making the production process more specialized. Excellent product quality is the source of our
Joann Ray
The quality of this supplier's products is completely reliable.
Our employees are working together to continue to create great scaffoldings, anchor nut with plate to maintain strong and consistent growth and profitability. As one of the most professional formwork hardware manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality formwork hardware at competitive price from our factory.