Formwork Tie Rod Water Stopper

This cast‑iron water stopper is an important waterproof part for concrete formwork. Fit it on tie rods before pouring, it stays buried inside walls after tie rods are removed. Its central disc blocks water seepage through tie‑rod holes and stops wall leakage.

✅ Alternative names :water stopper,water barrier nut,water-stop,water barrier,waterproof nut and tie rod water stop.

✅ Compatible with DW15, DW20 tie rods, wing nuts and PVC cones.

✅ Application: basements, water tanks, retaining walls, tunnels.

✅ Finishes: black raw finish or electric galvanized for anti‑rust performance.

✅ Support custom sizes to match your tie‑rod projects.

Simple to assemble and disassemble.Get in touch with us for your best competitive price.

 


Most popular Water Stoppers

 

 

 

water stopper supplier

Casting Surface Treatment

water barrier nut manufacturer

Black Finish Option

water-stop supplier
Galvanized Waterproof Nut
water barrier   waterproof nut tie rod water stop
On‑Site Formwork Application

 

 

Tie-Rod System Matching Accessories

Our tie-rod system works with a full set of formwork accessories for concrete construction.

Matching spare parts:

- Wing nuts, hex nuts, connection nuts, concrete anchor nuts

- Washer plates, wedge clamps, spring clamps

- Water stopper / water barrier nuts - Plastic cones and other plastic building fittings

These components fit wall formwork, column formwork, slab formwork and beam formwork projects. The DW15 water stopper connects to D15, D16, D17 tie rods to build a complete waterproof tie system. Tested performance: ultimate load 190 kN, safe working load 90 kN.

productcate-1201-1599

 

How to Install Formwork Water Barriers

Follow these simple-to-follow steps to put together your waterproof tie-rod assembly on-site:

  1. Thread the concrete tie rod through both sides of the water barrier.
  2. Slide PVC sleeves over the tie rod.
  3. Use adhesive tape to seal joints between PVC sleeves and water barrier unit.
  4. Mount the complete water-stop tie-rod set onto your formwork panels.
  5. Lock down the whole waterproof system with wing nuts and waler plates.

 

 

FAQ

Q1: What is a formwork water stopper used for?

A: It is installed on tie‑rod systems to stop water penetration through concrete wall joints for waterproof construction.

Q2: What material are your water stoppers made from?

A: QT450‑10 ductile cast iron, high strength for heavy‑duty formwork projects.

Q3: Which tie rods can match this water stopper?

A: Compatible with 15/17mm, 20/22mm tie rods and Dywidag bars.

Q4: What surface treatments do you offer for formwork water stoppers?

A: We supply electro‑galvanized, hot‑dip galvanized(GI), and raw black casting finishes for different construction site conditions.

Q5: Can you offer custom sizes?

A: Yes, custom specifications are acceptable based on your project requirements.

Q6: What is the load capacity of DW15 water stopper?

A: Ultimate load 190kN, safe working load 90kN for on‑site application.

 

As one of the most professional water stopper manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality water stopper at competitive price from our factory.

formwork accessory, formworks, Push Pull Prop
Send Inquiry