Shoring System Props House Floor Jacks

Heights of shoring props are adjustable across five ranges from 1.05m to 4.82m. The main parts are an O.D. 48mm inner tube, an O.D. 60mm threaded outer tube, a top plate, a bottom plate, a G pin, and a prop nut. They are mainly used to hold up concrete slabs and beams in construction, formwork, and scaffolding. They are designed for temporary support, not for permanent use. They will be removed when the concrete or structural is sound.

The shortest telescopic shoring props. The adjustable range is 1.05mm closed and 1.78m opened. 

Adjustable range 1.76m closed and 3.13m opened.

The load capacity of the shoring props varies according to the working height. The following table shows the ultimate load capacity and safe working load for all five sizes of shoring props at closed and open heights.

Wellfit Scafform is a leading formwork and scaffolding manufacturer in China. Customized formwork and scaffolding are acceptable upon drawing or sample. In the past 15 years of manufacturing, Wellfit scaffoldings and formworks have been exported to more than 50 countries.

Wellfit has own test labs. Complete test facilities are used to control scaffold and formwork quality. You can find raw material test reports, welding penetration, galvanizing and painting adhere test report, load capacity report etc. All of the tests are conformed to standards of BS1139, EN39, EN74, EN 12810, BS2482, AS1576 etc.

Main products: various formwork systems, ringlock scaffolding,cuplock, kwikstage, quick lock, twist lock, scaffolding frames, tubes&coupler, scaffold boards etc

Hot Tags: shoring system props house floor jacks, China shoring system props house floor jacks manufacturers, suppliers, factory, 4 Way U Fork, Forged T Head Formwork Tie Rod, Formwork Panel Clamp, Formwork Spring Clamp, Golden Alignment Formwork Clamp, Shoring Prop